UMX Yak 3D

OVERVIEW

With a flying weight of barely over an ounce (36 grams), the compact UMX™ Yak 54 3D ultra micro is small enough and light enough to be flown just about anywhere. But what really sets it apart is its specially tuned AS3X stabilization system. This exclusive technology makes it easy for sport pilots to discover the fun of hovering and harriers without sacrificing any of the agility an expert 3D pilot demands.

Specially Tuned AS3X® Receiver Makes 3D Easy The AS3X (Artificial Stabilization – 3-aXis) technology in the model’s receiver makes it easy to discover the fun of 3D aerobatics without feeling frustrated. Using a unique combination of sensors and software, it works behind the scenes to make slow-speed and knife-edge manoeuvres feel incredibly stable without limiting the aircraft’s agility or interfering with your control. The plane simply stays in whatever attitude you want without making you struggle to keep it there.

The receiver also features five pre-programmed flight modes – three default modes that are active out of the box and two alternate modes you can activate later. Each has different AS3X stability settings tailored for your skill level or the 3D manoeuvre you want to try.

Default Modes
General Flight Mode Heading hold in roll-axis for a locked-in feel.

Standard AS3X Mode Tuned for the expert 3D pilot but great for flying pattern aerobatics, too.

Hover Assist Mode Aggressive heading hold in roll, yaw and pitch so it's easier to enter and maintain a hover.

Alternate Modes
Knife-Edge Assist Mode Heading hold settings for roll, yaw and pitch that make it easy to try knife-edge manoeuvres.

Torque Roll Assist Mode Aggressive heading hold settings for yaw and pitch that make torque rolls easier.

EFLU3550UMX Yak 54 3D BNF™ Basic Ultra Micro
RRP

KEY FEATURES

  • No assembly required
  • Exclusive AS3X stabilization technology
  • Multiple flight modes that make 3D easy
  • Feather-light, carbon-reinforced foam airframe
  • Side-Force Generators for improved knife-edge flight
  • Potent 8.5mm coreless motor
  • Spektrum DSMX receiver
  • Spektrum long-throw performance linear servos
  • Stunning red and silver trim scheme
  • Carbon fibre landing gear with simulated wheel pants

SPECIFICATION

Wingspan: 430mm (16.9 in)
Length: 497mm (19.6in)
Wing Area: 472 sq cm (73 sq in)
Flying Weight: 36g (1.3 oz)
Motor Size: 8.5mm brushed (installed)
Receiver: DSMX®/DSM2 with AS3X® Technology (installed)
Recommended Battery: 150mAh 1S 7.4V 45C LiPo
Required Radio: 6+ Channel
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Required: No

RECOMMENDED SETUP

  • Full-range, 6+ channel DSMX®/DSM2 transmitter
  • 150mAh 1S 3.7V 45C LiPo flight battery (EFLB1501S45 recommended)
  • 1S LiPo charger

SPARES

EFL9054 Micro 4-Site PoleCat Corsair Propeller Shaft with Gear (2)
EFLU3551 Prop w/ Spinner(2): 140mm x 60mm
EFLU3556 Hardware/Pushrod set: Yak 3D
EFLU3557 Pushrod/Wing Brace set: Yak 3D
EFLU3570 Replacement Airframe: Yak 3D
EFLU5152 Ultra Micro Brushed Motor 8.5mm x 23mm
EFLU5153 Ultra Micro AS3Xtra Gearbox with Propshaft
EFLU5164 Ultra Micro AS3Xtra DSM2/DSMX UM AS3X Receiver/ESC
SPMSA2030L Spektrum 2.3gm Performance Linear Long Throw Servo
Ready Out of the Box

Flight-Ready Out of the Box No assembly is required. The model comes with the motor, Receiver/ESC and servos already installed. All you have to do is charge a battery, bind it to a compatible DSMX/DSM2® transmitter and fly. An E-flite® 150mAh 1S 3.7V 45C LiPo battery (EFLB1501S45) is recommended for best performance (sold seperatley).

Feather Light

Feather-Light, Carbon-Reinforced Airframe Carbon fibre rods brace the wings so you can enjoy outstanding power-to-weight performance and still have the rigidity necessary for crisp control response. The model also features carbon fibre landing gear with wheel pants.

Side Force Generators

Built-In Side Force Generators Side Force Generators attached to the wing tips boost rudder authority in knife-edge flight so you can fly tighter knife-edge loops.

DETAILS
EMAIL:
FOR ALL SERVICE AND TECHINICAL ENQUIRES:
SERVICE@HORIZONHOBBY.CO.UK
FOR ALL SALES ENQUIRES:
SALES@HORIZONHOBBY.CO.UK
TEL:
01279 641097
FAX:
01279 428863
OUR GLOBAL WEBSITES AMERICA | HORIZONHOBBY.COM GERMANY/EUROPE | HORIZONHOBBY.DE
ADDRESS:HORIZON HOBBY UK Ltd, UNITS 1 TO 4 PLOYTERS ROAD, STAPLE TYE, SOUTHERN WAY, HARLOW, ESSEX, CM18 7NS