VisionAire

PKZ6580
VisionAire 3D Trainer
£???.?? (RRP)

Believed to be the first of its kind the VisionAire is designed to be used as a 3D trainer, and being equipped with the latest AS3X technology it can take pilots all the way from basic right the way up to extreme 3D aerobatics.

The secret to the VisionAire’s flight performance is the onboard AS3X™ technology. This system automatically makes constant and simultaneous minor adjustments to the flight control surfaces, reducing the workload for the pilot whilst at the same time allowing a path of progress towards more extreme flight.

Once skill levels have improved and pilots feel more confident, they can adjust, or even switch off the AS3X system and fly to the maximum of their newly developed abilities.

Constructed from lightweight Z-foam the airframe has been reinforced with carbon fibre and this combined with the hollow section wing design has resulted in a super strong yet lightly loaded model that can stand the extremes of 3D flight with a degree of durability that is not normally seen in models of this type. Removable side force generators (SFG) on the wing tips offer stability at lower speeds and ensure perfect sustained knife-edge flight.

Powered by a Power 10 brushless outrunner motor the model has performance a- plenty and with a large battery hatch the various sizes of flight batteries that can be accommodated ensure more than adequate flight duration.

More practical aspects of the VisionAire are its two-piece wing for ease of transport and its larger than normal wheels that enable the model to take of from less than perfect landing strips and of course as it’s a “bind and fly” model, it can be flight ready in the time it takes to charge the flight battery.

Whilst not intended to be the first model for novice pilots, it must surely be the last model that intermediate to experienced pilots will ever need to learn extreme 3D flight.

Visionaire

FEATURES

  • Equipped with AS3X technology enables pilots to improve their 3D skills
  • BNF model just needs to be bound to a suitable DSM2/DSMX transmitter
  • Developed by champion pilot Quique Somenzini
  • Clear cover panel over receiver to allow easy AS3X adjustment
  • Power 10 motor for enhanced 3D performance
  • Skilfully designed airframe for lightweight and durability
  • Large wing area and low wing loading for super slow speed manoeuvres
  • Striking colour scheme aids orientation in the air
  • Lightweight large wheels allow takeoff from rougher flying sites
  • ParkZone battery, charger, ESC and servos all included (no transmitter)
  • Carbon fibre reinforced hollow wing design for strength and lightness
  • Double airfoil thickness at wing tip
  • Removable side force generators (SFG) for stability at lower speeds
  • Large battery compartment accommodates many different battery options
  • Large diameter wing tube for strength and rigidity
  • Shock absorbing wire landing gear
  • Two-piece wing for easy transport

SPECIFICATION

Wingspan: 1143mm (45inch)
Length 1088mm (42.5inch)
Motor: 1250Kv Power10 brushless outrunner
Battery: 2200mAh 3S LiPo
Radio: 4-channel DSM2/DSMX transmitter minimum
ESC: 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2)
Servos: 4 EFLR7155
Receiver: Spektrum™ AR635, 6-Channel AS3X Sport Receiver
Battery Charger: 300mA–2.0A 2–3 cell LiPo battery charger

SPARE PARTS

PKZ6538 Decal Set
PKZ6508 Spinner
PKZ6503 Landing gear set
PKZ6521 Wing & H. Tail Tube
PKZ6513 Hatch Set
PKZ6533 SFG Set
PKZ6537 Horns & Pushrod
PKZ6567 Bare Fuse
PKZ6528 Motor mount
PKZ6520 Wing Set
PKZ6524 H. Tail
PKZ6525 Rudder
PKZ6529 Tray & Gear Mount
PKZ6526 Cowl
EFLM7225 BL10 Motor
EFLM72252 Prop Adaptor
EFLA1040LB 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2)
SPMAR635 Spektrum 6-Channel AS3X Sport Receiver
PKZ1029 2200mAh 3S 25C 11.1v LiPo
EFLP12040E Propeller 12 x 4E Propeller
EFLR7155 13 g Digital Micro Servo E-flite 1
PKZ1040 2-3 DC LiPo balancing charger
EFLM72251 BL10 Motor Shaft
DETAILS
EMAIL:
FOR ALL SERVICE AND TECHINICAL ENQUIRES:
SERVICE@HORIZONHOBBY.CO.UK
FOR ALL SALES ENQUIRES:
SALES@HORIZONHOBBY.CO.UK
TEL:
01279 641097
FAX:
01279 428863
OUR GLOBAL WEBSITES AMERICA | HORIZONHOBBY.COM GERMANY/EUROPE | HORIZONHOBBY.DE
ADDRESS:HORIZON HOBBY UK Ltd, UNITS 1 TO 4 PLOYTERS ROAD, STAPLE TYE, SOUTHERN WAY, HARLOW, ESSEX, CM18 7NS
Even though this item is no longer being manufactured it still may be available through your local model shop.
Click here to find a model shop near you...