Mini Vapor

PKZU1200
Mini-Vapor RTF
£???.?? (RRP)

PKZU1280
Mini-Vapor BNF
£???.?? (RRP)

Indoor flying just got a whole lot smaller, however in this instance smaller is most definitely better.

With the latest featherweight model from Parkzone, the Mini Vapor, the possibilities for indoor flight are endless, it’s diminutive size and weight allow the Mini Vapor to be flown just about anywhere indoors with the smallest of rooms becoming a flying site without the risk of flying into anything.

This ultra lightweight model has a wingspan of 220mm (8.7inch) and the Ready to Fly (RTF) version comes out of the box with everything needed to get flying straight away, well you do have to charge the 30mAh flight battery first, but this simply plugs into the E-flite DC LiPo charger that comes complete with 8 dry cell AA batteries.

When it comes to control the Vapor uses a fully proportional Parkzone MLP4 radio featuring the latest Spektrum 2.4Ghz DSM2/DSMX® technology for smooth interference free control. The onboard electronics feature a 20mAh motor, a combined micro receiver, speed controller and servos mounted to a common circuit board that is about the size of a postage stamp.

The airframe of this delightful model is made of carbon and covered with a suitably lightweight transparent film of Red and Yellow with clear accents giving the model an almost “butterfly” look and just like a butterfly, the Mini Vapor is able to flit from place to place with remarkable ease.

With no need to leave your house, going flying has never been easier.

Mini-Vapor
Features

FEATURES

  • Features RTF
  • Fully proportional throttle, elevator and rudder control
  • Super light DSMX® 3 channel Rx/ESC with two servos
  • 1S brushed coreless motor
  • Carbon fibre fuselage rod
  • Carbon fibre push rods
  • Composite plastic/carbon fibre wing structure
  • Lightweight PET film covering
  • 1S 30 mAh 25C LiPo battery
  • 1-cell DC charger powered by AA dry cell batteries (8 included)
  • ParkZone MLP4DSM 4-channel transmitter

  • Features BNF
  • Fully proportional throttle, elevator and rudder control
  • Super light DSMX® 3 channel Rx/ESC with two servos
  • 1S brushed coreless motor
  • Carbon fibre fuselage rod
  • Carbon fibre push rods
  • Composite plastic/carbon fibre wing structure
  • Lightweight PET film covering
  • 1S 30 mAh 25C LiPo battery
  • 1-cell DC charger powered by AA dry cell batteries (8 included)

SPECIFICATION

Wingspan: 220mm (8.7inch)
Length: 298mm (11.75inch)
Weight: 8.6g (0.3oz)
Motor: 1S Brushed coreless motor (installed)
RX/Servos: Super-light DSMX 3Ch-Rx/ESC with 2 servos (installed)

SPARE PARTS

PKZU1202 120mm x 39mm Indoor Propeller
PKZU1206 Landing Gear
PKZU1207 Tail Skid
PKZU1216 6mm Brushed Motor
PKZU1220 Wing
PKZU1222 Pushrod Set
PKZU1224 Horizontal Stabiliser
PKZU1225 Rudder
PKZU1227 6mm motor Gear Box
PKZU1228 Propeller Shaft
PKZU1236 Super Lite Servo Mechanics
PKZU1252 Super Lite DSMX 3-channel RX/ESC/Servo
PKZU1261 Fuselage with Electronics
PKZU1267 Bare Fuselage
PKZU1270 Replacement Airframe
DETAILS
EMAIL:
FOR ALL SERVICE AND TECHINICAL ENQUIRES:
SERVICE@HORIZONHOBBY.CO.UK
FOR ALL SALES ENQUIRES:
SALES@HORIZONHOBBY.CO.UK
TEL:
01279 641097
FAX:
01279 428863
OUR GLOBAL WEBSITES AMERICA | HORIZONHOBBY.COM GERMANY/EUROPE | HORIZONHOBBY.DE
ADDRESS:HORIZON HOBBY UK Ltd, UNITS 1 TO 4 PLOYTERS ROAD, STAPLE TYE, SOUTHERN WAY, HARLOW, ESSEX, CM18 7NS
Even though this item is no longer being manufactured it still may be available through your local model shop.
Click here to find a model shop near you...