Designed with experienced sailplane pilots in mind, the Radian™ Pro comes out of the box with ailerons and functioning flaps that allow pilots to take advantage of sailplane mixing functions like reflex, camber and crow.
It’s not however essential to have a programmable system to fly it. Any 5-channel sport radio can provide basic four-channel control with flaps using the included Y-harness. Like the original Radian, the Radian Pro also comes equipped with a powerful 480-size 960Kv brushless motor system that can catapult it to altitude in seconds.
Its airframe is constructed from the same tough Z-Foam™ material and has been reinforced with fibreglass blades in the fuselage and wing to reduce flex. This reinforcement, along with that of the carbon fibre rod in the wing, make it possible to achieve a level of soaring precision with the Radian Pro that’s on par with many competition gliders.
The Bind-N-Fly version includes both a 2 to 3 cell DC LiPo charger as well as a 1300 mAh LiPo battery and all of the electrics including servos, AR600 receiver and ESC are installed. All that has to be completed to get in the air is to charge the battery and bind the receiver to a DSM2 radio. To take full advantage of the capabilities of the Radian Pro, a programmable radio system with sailplane mixing functions is recommended.
The Radian Pro BNF comes equipped with an AR600 6-channel receiver, ailerons and functioning flaps. This makes it possible for experienced sailplane pilots with advanced programmable radio systems to take advantage of mixing functions like reflex, camber and crow.
Top - crow, left camber, right reflex.
5-channel control – throttle, aileron, elevator, rudder and flaps.
Spektrum 2.4GHz DSM2 AR600 receiver installed (BNF)
Powerful 480-size 960Kv brushless outrunner motor installed. E-flite™ Pro 30A brushless ESC installed.
Durable, lightweight and repairable Z-Foam™ construction
|Wingspan:||2000mm (78.5 in)|
|Length:||1140mm (45.0 in)|
|Weight:||980 g (34.6 oz)|
|Motor:||480 BL 960 KV Outrunner (installed)|
|ESC:||E-Flite PRO 30A ESC (installed)|
|Servos:||PKZ SV 80 sport servos (6 installed)|
|EFLA1030||30-Amp Pro Switch-Mode BEC Brushless ESC|
|PKZ5401||Optional Flap Set: Radian Pro|
|PKZ5467||Bare Fuselage without Canopy|
|PKZ1017||Propeller 9.75 x 7.5_1|
|PKZ1018||Prop Adapter & Spinner Set|
|PKZ1033||11.1V 1300mAh LiPo Bat with EC3 Connector|
|PKZ1040||2-3 DC LiPo Balancing Charger|
|PKZ4716||480B Outrunner BL Motor|
|PKZ5401||Optional Flap Set|
|PKZ5402||Decal sheet: Radian Pro|
|PKZ5403||Aileron servo extension: Radian Pro|
|PKZ5404||Flap servo extension (305mm)|
|PKZ5423||Flap Pushrod Set|
|PKZ1081||Sv80 long lead 3-wire servo|
|PKZ1090||Dsv 130 3 wire digital servo metal gear|
|PKZ1060||Mini servo (3w) with arms, short lead|