LOS04010 8IGHT Nitro RTR

8IGHT RTR Overview
If you are serious about becoming a competitive nitro buggy racer, this is the place to start. The
Losi® 8IGHT Nitro Buggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .21 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT buggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle’s performance with many of the 8IGHT option parts currently available.

Losi 8ight
.21 EngineServosWheel

Race-Proven Durability
In addition to its 4mm T-6 aluminium chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray that prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.

Brute Power
A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don’t have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions.

Centre and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

Specification:

Type: 4WD Nitro Buggy
Completion Level: Ready To Run
Scale: 1/8
Length: 497mm (19.6 in)
Width: 308mm (12.1 in)
Height: 180mm (7.1 in)
Weight: 3.5 kg (7.8 lb)
Ground Clearance: 60mm (2.4 in)
Wheelbase: 323-327mm
Chassis: 4mm T-6 Aluminium
Suspension: Independent
Shock Type: Oil-Filled
Drivetrain: 4WD
Differentials: Sealed Viscous Gear
Wheel Type: Dish
Tyre Tread: XBT
Engine Size: .21
Pinion: 17T
Spur Gear: 50T
Gear Pitch: 1.0 MOD
Internal Gear Ratio: 3.92:1
Final Drive Ratio: 11.5:1
Brakes: Composite Disc with Steel Pads
Body: 8IGHT™ Cab-Forward, Screened
Ball Bearings: Full Set
Experience Level: Intermediate
Environment: All-Terrain
Assembly Required: No

Features:

  • Your fast track to nitro buggy racing
  • 4mm T-6 aluminum chassis plate
  • Gen III radio tray for longer servo life
  • Dynamite® .21 nitro engine with pull start
  • Pre-set suspension geometry
  • Metal-gear transmission and sealed differentials
  • Centre and rear dogbones
  • 15mm adjustable oil-filled shocks
  • Spektrum™ waterproof metal-gear servos
  • Includes Spektrum DX2E DSMR transmitter
  • Includes Dynamite 1600mAh 6V NiMH receiver pack

Needed to Complete:

  • 20–30% Nitromethane fuel
  • Nitromethane-Approved Dispenser
  • NiMH Charger
  • Glow Igniter

Resources:

DETAILS
EMAIL:
FOR ALL SERVICE AND TECHINICAL ENQUIRES:
SERVICE@HORIZONHOBBY.CO.UK
FOR ALL SALES ENQUIRES:
SALES@HORIZONHOBBY.CO.UK
TEL:
01279 641097
FAX:
01279 428863
OUR GLOBAL WEBSITES AMERICA | HORIZONHOBBY.COM GERMANY/EUROPE | HORIZONHOBBY.DE
ADDRESS:HORIZON HOBBY UK Ltd, UNITS 1 TO 4 PLOYTERS ROAD, STAPLE TYE, SOUTHERN WAY, HARLOW, ESSEX, CM18 7NS