TwitterFacebook
1/10th 2WD Electric Buggy

TLR03006 1/10th 22 3.0 Electric Buggy Kit

The evolution of the 22™ platform continues with the 22 3.0 buggy. Changes include a wider chassis, new motor location and a revised suspension. The kit also includes the option parts necessary to build a pro-level vehicle, right out of the box.

3-Gear Transmission with Revised Motor Location
The motor location is 12mm closer to the diff gear than on the 2.0. This increases the rear weight bias, providing better rear grip on exit, more entry steering and a buggy that, overall, is easier to drive. The new 3-gear transmission decreases chassis roll, greatly improving the vehicle’s stability, consistency and braking. A 4-gear transmission is available separately for lower-grip tracks and different driving styles.

No-Compromise, Mid-Motor Design
Focusing solely on a mid-motor design eliminated the weight and engineering compromises inherent in a chassis with two mounting options.

Transverse Battery Mounting
The wider, 2.5mm aluminium chassis and moulded mudguards include the option to mount saddle and shorty LiPo packs across the chassis. Shorty LiPo packs can also be mounted fore to aft. This allows for more weight bias-tuning front to rear and wider placement of battery weight. The result is a more stable buggy without an increase in static weight.

Option Parts Included
Many of the parts included with this kit are popular upgrades that provide everything needed to build a pro-level buggy right out of the box. This includes milled, 7075-T6 aluminium parts like the top shaft, adjustable rear pivot mounts, motor plate, rear camber block, shock bleeder caps and ball stud spacers throughout. Machined shock pistons and bushings, Ti-CN coated shock shafts and hinge pins, C3 spec hub bearings, low frequency springs and the heavy duty slipper system are also included.

RearParts
4-Gear transmission available separttely
Revised Front SuspensionRear Suspension

Revised Front Suspension Geometry
All-new front caster blocks and suspension arms allow for variable length arm adjustment. This makes it possible to run with short or long front-arm geometry. This, together with the bell crank steering system, provides the same amazing steering 22™ drivers have come to love, but with a more consistent feel between different surfaces. It all adds up to a buggy with neutral balance that requires less tuning from track to track to maximize performance.

Revised Rear Suspension Geometry
The rear pivot is 2mm wider, giving the buggy significantly more grip and stability without losing any corner speed. The rear arm has also been revised with new shock mount locations and a slightly reduced gull wing effect. This, paired with the popular ‘0 hole’ modification that is now designed into the rear shock tower, optimises the jumping, landing and chassis roll dynamics of the rear end for the higher rear-weight bias.

Lightweight 7075-T6 Aluminium Chassis
This chassis is the same length as the optional 2.5mm chassis for the 2.0 version. It features strategically milled pockets that reduce weight without compromising strength.

Adjustable Rear Toe and Anti-Squat
The rear pivots now accept adjustable inserts that allow you to make quick toe and anti-squat adjustments without having to buy additional parts. Both adjustments are made in 0.5 degree increments. Toe adjustments range from 2.5 to 4.0 degrees. Anti-squat adjustments range from 0.0 to 3.0 degrees.

Gen II 12mm Big Bore Shocks
The new standard for performance and maintenance, these shocks feature:

- X-Ring Seals
- Machined shock bushings
- Machined 2 x 1.5 and 2 x 1.6mm pistons
- TiCN-coated shock shafts
- Aluminium bleeder screw caps
- Threaded hard anodised shock bodies
- Low frequency springs
- Spring cups that snap onto the shock shafts

Updated Ball Differential
The 22 3.0 ball differential delivers super-smooth, long lasting performance thanks to features like:

- Flattened 2nd operation outdrives
- Revised thrust washers
- Tungsten carbide diff and thrust balls
- One-piece nut
- Self-centering diff gear

HDS Slipper
Heavy Duty Slipper (HDS) pads and 78T HDS spur gears, along with grooved and tapered slipper plates, are included. They all work together to improve slipper consistency and durability.

SPECIFICATION

Type: 2WD Electric Buggy
Completion Level: Kit
Scale: 1/10th
Length: 382mm (15.0 inch)
Width: 250mm (9.8 inch)
Height: 148mm (5.8 inch)
Weight: 1550g (54.7 oz)
Wheelbase: 280mm (11.0 inch)
Chassis: 2.5mm 7075-T6 Aluminium
Suspension: Lower A-Arm, Upper Adjustable Link
Shock Type: 16mm Big Bore, Oil-Filled
Drivetrain: 2WD
Differential: Ball Differential
Motor Size: 540
Spur Gear: 78T
Gear Pitch: 48 Pitch
Internal Gear Ratio: 2.43:1
Brakes: Controlled via Motor/ESC
Body: 22 3.0 Cab Forward with Optional Rear Fin
Ball Bearings: Full Set of Rubber-Seal Ball Bearings
Experience Level: Advanced
Assembly Required: Yes
Environment: All-Terrain
Approx Assembly Time: 3-5 Hours

FEATURES

  • Mid-motor design
  • Revised motor location 12mm closer to diff gear
  • 3-Gear transmission (4-gear available separately)
  • Transverse battery mounting option
  • Optional parts included
  • Revised front and rear suspension geometry
  • Lightweight 2.5mm 7075-T6 aluminium chassis
  • Adjustable rear toe and anti-squat
  • Gen II 12mm big bore shocks
  • Updated ball differential
  • HDS slipper

NEEDED TO COMPLETE

  • 1/10th Scale Brushless Motor
  • 1/10th Scale Electronic Speed Control
  • 1/10th Scale Servo
  • LiPo Battery Pack
  • 48 Pitch Pinion Gear
  • 2 to 3 Channel Radio System
  • Polycarbonate -Compatible Paint
  • 1/10th Scale Off-road Truggy Tyres and Inserts
  • Modeling Tools
TLR
DETAILS
EMAIL:
FOR ALL SERVICE AND TECHINICAL ENQUIRES:
SERVICE@HORIZONHOBBY.CO.UK
FOR ALL SALES ENQUIRES:
SALES@HORIZONHOBBY.CO.UK
TEL:
01279 641097
FAX:
01279 428863
OUR GLOBAL WEBSITES AMERICA | HORIZONHOBBY.COM GERMANY/EUROPE | HORIZONHOBBY.DE
ADDRESS:HORIZON HOBBY UK Ltd, UNITS 1 TO 4 PLOYTERS ROAD, STAPLE TYE, SOUTHERN WAY, HARLOW, ESSEX, CM18 7NS